|
Component Type |  | Solid State
| | Mounting Type | | DIN Mount
| | Contact Rating | | 10 A
| | Contact Configuration | | SPST-NO
| | Input Voltage Range | | 3 to 32 VDC
| | Output Voltage Range | | 24 to 280 VAC
| | Load Type | | AC
| | Switching Type | | Zero Cross
| |
| |
|
Switching Device | | SCR
| | Switching Voltage | | 24 to 280 VAC
| | Maximum Zero Turn-On Voltage [Vpk] | | 35 V
| | Maximum Rate of Rise Off State Voltage [dv/dt] | | 500 V/us
| | Incandescent Lamp Ampere Rating [rms] | | 8 A
| | Motor Load Rating [rms] | | 4.5 A
| | Min. Load Current to Maintain On | | 50 mA
| | Non-Repetitive Surge Current (1 cycle) | | 500 A
| | Max. RMS Overload Current (1 second) | | 24 A
| | Max. Off State Leakage Current [rms] | | 10 mA
| | Typical On State Voltage Drop [rms] | | 1.25 VAC
| | Max. On State Voltage Drop [rms] | | 1.6 VAC
| | Maximum I2 T for Fusing (A2) | | 1250
| |
| |
|
Voltage Range | | 3 to 32 VDC
| | Must Release Voltage | | 1 VDC
| | Nominal Input Impedance | | Current Regulator
| | |
Typical Input Current at 5VDC or 240VAC | | 16 mA
| | Reverse Polarity Protection | | Yes
| |
| |
|
Operating Time (Response Time) - On | | 8.3 ms
| | |
Operating Time (Response Time) - Off | | 8.3 ms
| | |
Rated Insulation Voltage, Input to Output | | 2500 VAC
| | Dielectric Strength, Terminals to Chassis | | 2500 VAC
| |
| |
|
Ambient Air Temperature around the Device - Storage | | -40 to +100 °C
| | Ambient Air Temperature around the Device - Operation | | -30 to +80 °C
| | Degree of Protection | | IP 20
| |
| |
|
Thermal Resistance (Junction to Case) | | 0.66 °C/W
| | Integral Heat Sink | | 4 °C/W
| | LED Input | | Green
| | Terminal Wire Capacity | | 14 AWG
2.1 mm˛
| | |
Terminal Torque (Maximum) | | 7.1 in lb
| |
| |
|
Agency Approvals | | UL
CE
CSA
| |
| |
